Archive for the ‘Model Horses’ Category

Highland Pony Completed

Thursday, June 16th, 2011

I am so pleased to finally have finished this mini. She’s been hanging around the studio for a couple months in only her body color; I just could not get the G3 Highland Pony Fire stoked and burning under my patootey. And now, tah-dah!

Okay now, I know that it’s not like I painted the Mona Lisa or anything. But sometimes I lose momentum with a certain creation (no matter what it is), occasionally to the point of dislike. In rare instances, the dislike grew until I despised a few, which were then promptly sold.  Weird, ya? I think so, too. O well, what we can’t change we learn to bear gracefully, ya? So I’m stoked because not only did I finish her, but I still like her. Anyhoo, for those interested, the G3 Highland Pony is for sale.

DeTail of Two Models

Thursday, June 16th, 2011

I have had one custom (G3 Highland Pony) sitting around waiting to have her hooves finished. And two others ( G1 Arabian Mare and G4 Driving Horse) awaiting their markings, that like to hang out with her.  It’s the latter two that are pictured here:

I purchased both of these guys already prepped and primed. They don’t photograph very well as the flash really washes out all of their nice shading. While they may look it, they aren’t the same color. I’d initially intended the Arab to be bay and early on in the pastel dusting process, she adamantly stated that she wanted to be a chestnut. I kept going with plans of a bay (note her dark knees and unpainted legs; these were intended to be black) and finally she’d had enough; I stopped the dusting process immediately. She only had 2 coat of the acrylic base on her m/t when I took this photo today.  The Driving Horses beside her too, is chestnut, tho a much brighter shade. She is in the process of getting her blanket put on in this photo. I had initially penciled in a “roan” blanket and went back over it with thinned white paint. I’ll post pix of the finished G3 Highland Pony soon.

The Olde School Tool

Wednesday, June 15th, 2011

I set to work hacking up another critter today with my trusty coping saw. This tried and true implement has been with me for a very long time.

Here, held aloft with a pre-made, twisted wire “spine,” I’ve used Ye Olde Coping Sawe to frame my on-site foreman, Mojo. Due to CTS in both hands, I can’t hold the stupid thing very long to saw with it, so I’ve developed the following alternative approach:

I hold it between my knees while using both hands to, instead of holding the saw, hold the object to be hacked (which in this case is the neck). Worx like a charm.  So then I stuck in the pre-made spine mentioned earlier to connect the itty bitty head to the itty bitty body from whence it came, like so:

Then he got a neck form roughed in like so:

 

Now this is just to give me an idea of what he needs in terms of a neck… I dunno if I’ll trim a bit along the crest or not… Tho in looking at him now, I’ve decided to braid his mane and tail in sculpted floss  and leave the Pooky Lipped QH gelding in western dress. Maybe a nice banded mane…? Dunno….

And here is my second G2 CM QH:

Being as how this guy is intended to be a Foundation Type Appaloosa, I’m going to whack his head off at some point and shorten that neck a bit. I really don’t care for the turn in the neck of this mold and once I redid him into a canter, it seems the curve is much more pronounced, or at least much more noticeable now. I don’t know how other peeps do it, but I’ve never had any luck taking pictures of horses (real or otherwise) facing me without them looking like some weird kind of bubble-headed balloon float. And that fact alone has necessitated the change in this beastie. I think the length of that neck’s more noticeable in this photo:

In my mind, this does not a Foundation Appaloosa equal! Stay tuned…

 

Go Figure…?

Tuesday, June 14th, 2011

A body just naturally tends to think that a one-eyed artist would stick with the larger models, ya?  At least larger than the 5″ mark. Especially when that very same artist, used to prefer working on a larger victi—err… models. Au contraire! I find that I’m becoming hooked on minis… Go figure… I honestly don’t know why I’ve been bitten by the mini bug. My current theory is that, during my hiatus from the hobby, I sold off a lot of my critters and what I didn’t sell got thrown away (no worries, they were just bodies in all stages of customization), thereby downsizing tremendously. Since, like a druggie with a habit, I just could not leave the models alone, I cracked and acquired four Traditionals. Did I mention that I downsized? Well, it wasn’t just with models… it was with living space, too. I have wayyy too much non-model stuff (not to mention the tons of models yet still packed up) with no where to put any of it (them). Walking through our house is very much akin to traversing a mine field; if you do it, you may be hurt. So to conclude my lengthy explanation, I believe I’m gravitating toward the minis due my space constraints.  And with that said, here’s what I’m doodling with currently.

This G2 Stock Horse is intended to be a nice loping WP type Appy gelding with a thin mane and rat tail …

Below are two G3 Arabian stallions eyeballing each other… Both have had their feet refined a bit, tho the chestnut’s only getting a resculpted tail. The bay (on the right) is now standing with his head extended and is going to have sculpted floss m/t.

This G3 Mustang has had his legs cleaned off and sports a newly sculpted mane and tail.

 

This is another G2 Stock Horse with his head dropped and a pooky lip. He’ll have a sculpted floss mane and tail.

 

Stone Pebbles Stock Horse CM into an Iberian type (Andalusian? Lusitano? Who knows…)

This poor old guy has resided, in this basic shape, within my body box since this particular mold came out. I have tried to sell him unfinished several times with no takers. Since I think he looks kewel, I decided to finish him myself (I mean, it was my stupid arse that decided to work on the minis, ya?). His tail is just roughed in at this point and hanging off his booty by the twisty-tie used to create the inAAitial form. Can you say lazy? But in my defense, it’s wonderfully twisty (duh, it’s a twist tie after all. Go figure…) and I can change my mind quite a bit about his tail carriage without any worry of the wire breaking.

Flea Bites!!

Tuesday, June 14th, 2011

Being from The Old School of Model HorseHacking, I see what was once a “cutting edge technique,” becoming somewhat antiquated, for lack of a better word. Back in The Day, the favored method for applying fleabites was by using a tooth and/or paint brush loaded with skim-milk consistency paint, and flicking or splattering said bites onto the lucky recipient (i.e. model horse). In the midst of what’s placed on the show table today, these splatter-painted guys tend to be overlooked in favor of much more detailed models. So with that said, below are my first attempts at penciled fleabites.

Both this model

Both of these boys were dusted with super-pale mixes of pastel dust and mica powder, which progressively got darker (minus the mica powder) with each application. Believe it or not, the LB TWH resin was the more difficult of the two, as far as using colored pencils go… With the SM, I just tapped and tapped and tapped, following the direction of the hair growth. With the LB, I had to invest a bit more time in placing pencil to model, to avoid that pesky Been-Painted-By-A-Coke-Addict-With-A-Nervous-Tick look.

I’ve also found that these models require lots of layers of protective spray, at least for me, as I tend to place aforementioned beastie on my lap while I work and just that slight contact causes the bites on the opposite side to smudge, fade and disappear altogether.

Will be posting photos of these boys when they get their hair done.

Here’s my blog, enjoy

Monday, June 6th, 2011

MOOOJIE